54FCT573ATLB
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| Prop. Delay@Nom-Sup | 5.6 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.54mm |
| Length | 8.9mm |
| Width | 8.9mm |
| Thickness | 1.52mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.8 ns |
| Turn On Delay Time | 9.8 ns |
| Family | FCT |
| Logic Function | Latch |
54FCT573ATLB Overview
In the LCC package, it is embedded. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. With the supply voltage set at 5V, it is able to operate. 20 pins are included. In terms of electronic devices, this one is in the FCT family. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. There are 5V power supplies required for this machine to operate. For maximum efficiency, the supply voltage should be set to 5V. There is also BROADSIDE VERSION OF 373 characteristics to it. 32mA is set as the low level output current. -12mA is set as the high level output current. The operating temperature should be lower than 125°C. There should be a temperature above -55°C at which the device operates. 5.5V is the maximum voltage it supports. It operates with the minimal supply voltage of 4.5V. There is a logic IC BUS DRIVER used in the system.
54FCT573ATLB Features
LCC package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT573ATLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT573ATLB Latches applications.
- Buffer/Storage Registers
- Data acquisition
- Pattern Generators
- Storage
- Control circuits
- Network Switches
- Digital bus buffer
- Shift left with parallel loading
- Clocks
- A/D and D/A conversion
