5962-9052604MUA

0.635mm 5V 16kB CPLD 196 Pin 40MHz 5V

Manufacturer: Texas Instruments
Nocochips NO: 815-5962-9052604MUA
Package: -
Datasheet: -
Stock: 664
Description: 0.635mm 5V 16kB CPLD 196 Pin 40MHz 5V (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Number of Pins	196
Number of Terminations	196
ECCN Code	3A001.A.2.C
Max Operating Temperature	125°C
Min Operating Temperature	-55°C
HTS Code	8542.31.00.01
Subcategory	Digital Signal Processors
Technology	CMOS
Terminal Position	QUAD
Terminal Form	FLAT
Supply Voltage	5V
Terminal Pitch	0.635mm
Frequency	40MHz
Pin Count	196
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	MILITARY
Max Supply Voltage	5.25V
Min Supply Voltage	4.75V
Memory Size	16kB
RAM Size	8kB
uPs/uCs/Peripheral ICs Type	DIGITAL SIGNAL PROCESSOR, OTHER
Supply Current-Max	600mA
Bit Size	32
Frequency (Max)	40MHz
Data Bus Width	32b
Address Bus Width	24
On Chip Program ROM Width	32
Boundary Scan	NO
Low Power Mode	YES
Screening Level	MIL-PRF-38535
Format	FLOATING POINT
Integrated Cache	NO
RAM (words)	2000
Number of Serial I/Os	2
Number of Timers	2
ROM Programmability	MROM
Number of External Interrupts	4
Barrel Shifter	YES
Internal Bus Architecture	MULTIPLE
On Chip Data RAM Width	32
Number of DMA Channels	1
Height Seated (Max)	3.3mm
Length	34.29mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

5962-9052604MUA Overview

The use of it is terminated by 196.A voltage of 5V is used as the supply voltage.196 component pins are present.The configuration of this board includes 196 pins.A specific design is present for the device in order for it to operate at the frequency of 40MHz.It adopts Surface Mount as its mounting way.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.4.75V is the minimum voltage that can be supplied to this device.There is a maximum voltage supply of 5.25V to this device.The device operates on a voltage of 5V as its supply voltage.Data can be stored in this device's memory in 16kB format.A 5V electric power source is used to power it.It employs DIGITAL SIGNAL PROCESSOR, OTHER as its uPs/uCs/Peripheral ICs type.Ideally, the operating temperature should be below 125°C.The operating temperature should be in excess of -55°C.A 2 timer can give accurate feedback and activate events in industrial settings.The external source of 4 interrupts is causing 4 interrupts.It should have a maximum frequency below 40MHz.There are 1 DMA channels used to transfer data without exposing the CPU to a work overload.Data is transferred between devices using serial 2 I/Os.