74ABT16374BDGG,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 260MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 2mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.7 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ABT16374BDGG,118 Overview
The flip flop is packaged in a case of 48-TFSOP (0.240, 6.10mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74ABT series. This D flip flop should not have a frequency greater than 260MHz. D latch consists of 2 elements. As a result, it consumes 2mA quiescent current. Terminations are 48. The 74ABT16374family includes it. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 4pF farads. In terms of electronic devices, this device belongs to the ABTfamily of devices. The part is included in FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. A total of 5V power supplies are needed to run it. A total of 2ports are embedded in the D flip flop.
74ABT16374BDGG,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT16374BDGG,118 Applications
There are a lot of NXP USA Inc. 74ABT16374BDGG,118 Flip Flops applications.
- Automotive
- Memory
- EMI reduction circuitry
- QML qualified product
- Individual Asynchronous Resets
- Asynchronous counter
- Instrumentation
- Cold spare funcion
- Guaranteed simultaneous switching noise level
- CMOS Process
