74ABT16374BDL,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 260MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 2mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.7 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT16374BDL,118 Overview
The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74ABT series. You should not exceed 260MHzin the output frequency of the device. In total, there are 2 elements. There is a consumption of 2mAof quiescent energy. It has been determined that there have been 48 terminations. You can search similar parts based on 74ABT16374. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 4pF farads. An electronic device belonging to the family ABTcan be found here. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. The D flip flop has no ports embedded.
74ABT16374BDL,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT16374BDL,118 Applications
There are a lot of NXP USA Inc. 74ABT16374BDL,118 Flip Flops applications.
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch
- High Performance Logic for test systems
- Supports Live Insertion
- Bounce elimination switch
- Shift registers
- Shift Registers
- Digital electronics systems
- Buffered Clock
- Bus hold
