74ABT16374CSSCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 150MHz |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 64mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 6.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2mA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Frequency | 150MHz |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT16374CSSCX Overview
The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ABT series. In order for it to function properly, its output frequency should not exceed 150MHz. The list contains 2 elements. As a result, it consumes 2mA quiescent current and is not affected by external forces. You can search similar parts based on 74ABT16374. This T flip flop has a capacitance of 5pF farads at the input. A part of the electronic system is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. It is designed with a number of bits of 16. Its flexibility is enhanced by 8 circuits. For high efficiency, the supply voltage should be kept at 5V. Its output current of 64mAallows for maximum design flexibility. To operate, the chip has a total of 3 output lines. The number of input lines is 2. There is -32mA output current at the high level. The low level output current is set to 64mA. The operating temperature should be lower than 85°C. Temperatures above -40°Cshould be used. Initially, it requires a voltage of 4.5V as the minimum supply voltage. The maximum supply voltage supported by the flip flop is 5.5V. A frequency of 150MHzcan be achieved.
74ABT16374CSSCX Features
Tape & Reel (TR) package
74ABT series
48 pins
16 Bits
74ABT16374CSSCX Applications
There are a lot of ON Semiconductor 74ABT16374CSSCX Flip Flops applications.
- Supports Live Insertion
- Data storage
- Circuit Design
- Synchronous counter
- Common Clocks
- ESD protection
- Computers
- Clock pulse
- Single Down Count-Control Line
- Computing
