74ABT16821ADL,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16821 |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 1mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 3.3ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 3.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 3.7 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Max Frequency@Nom-Sup | 160000000Hz |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT16821ADL,518 Overview
It is embeded in 56-BSSOP (0.295, 7.50mm Width) case. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 74ABTseries of FPGAs. There should be no greater frequency than 250MHzon its output. A total of 2elements are present in it. This process consumes 1mA quiescents. Terminations are 56. The object belongs to the 74ABT16821 family. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 3pF farads. Electronic devices of this type belong to the ABTfamily. The part you are looking for is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. The D latch operates on 5V volts. The D flip flop has no ports embedded.
74ABT16821ADL,518 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT16821ADL,518 Applications
There are a lot of NXP USA Inc. 74ABT16821ADL,518 Flip Flops applications.
- Memory
- Synchronous counter
- Pattern generators
- Control circuits
- Dynamic threshold performance
- Storage Registers
- CMOS Process
- Supports Live Insertion
- EMI reduction circuitry
- Balanced Propagation Delays
