74ABT273ADB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 350MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT273ADB,118 Overview
The flip flop is packaged in a case of 20-SSOP (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74ABT series. Its output frequency should not exceed 350MHz. In total, there are 1 elements. T flip flop consumes 250μA quiescent energy. 20terminations have occurred. You can search similar parts based on 74ABT273. It is powered from a supply voltage of 5V. Its input capacitance is 3.5pFfarads. The electronic device belongs to the ABTfamily. The part you are looking for is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power.
74ABT273ADB,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT273ADB,118 Applications
There are a lot of NXP USA Inc. 74ABT273ADB,118 Flip Flops applications.
- Data Synchronizers
- Guaranteed simultaneous switching noise level
- QML qualified product
- Memory
- Power down protection
- Computers
- Individual Asynchronous Resets
- Safety Clamp
- Load Control
- Bus hold
