74ABT273APW,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 350MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Max Frequency@Nom-Sup | 250000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74ABT273APW,112 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). A package named Tubeincludes it. It is configured with Non-Invertedas an output. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74ABT series. In order for it to function properly, its output frequency should not exceed 350MHz. In total, it contains 1 elements. T flip flop consumes 250μA quiescent energy. A total of 20 terminations have been made. The 74ABT273family includes it. A voltage of 5V provides power to the D latch. Input capacitance of this device is 3.5pF farads. Electronic devices of this type belong to the ABTfamily. This RS flip flops is a part number FF/Latches. 5.5Vis the maximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. In order for the device to operate, it requires 5V power supplies.
74ABT273APW,112 Features
Tube package
74ABT series
5V power supplies
74ABT273APW,112 Applications
There are a lot of NXP USA Inc. 74ABT273APW,112 Flip Flops applications.
- Dynamic threshold performance
- Storage Registers
- Modulo – n – counter
- Latch-up performance
- Frequency Divider circuits
- Computers
- Test & Measurement
- Synchronous counter
- Matched Rise and Fall
- Patented noise
