74ABT374CSCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 150MHz |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 7.6 ns |
| Turn On Delay Time | 3.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Frequency | 150MHz |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT374CSCX Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. The 74ABTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 200MHz. A total of 1elements are contained within it. There is 50μA quiescent consumption. The 74ABT374family includes it. This T flip flop has a capacitance of 5pF farads at the input. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. There are 8bits in its design. Using 8 circuits, it is highly flexible. In order to ensure high efficiency, the supply voltage should remain at 5V. In order for the chip to function, it has 3output lines. Currently, there are 1 input lines present. In this case, the high level output current is set to -32mA. It is set to 64mAfor low level output current. Ideally, the operating temperature should be lower than 85°C. Temperatures above -40°Cshould be used. In order for it to operate, a supply voltage of 4.5Vis required. 5.5Vis its maximum supply voltage. It is possible to achieve a frequency of 150MHz.
74ABT374CSCX Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
74ABT374CSCX Applications
There are a lot of ON Semiconductor 74ABT374CSCX Flip Flops applications.
- CMOS Process
- ATE
- Clock pulse
- Shift registers
- Digital electronics systems
- Event Detectors
- Reduced system switching noise
- ESD protection
- Load Control
- Frequency Dividers
