74ABT74DB,118
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | ABT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 15mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.05mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74ABT74DB,118 Overview
The item is packaged in 14-SSOP (0.209, 5.30mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. It is configured with Differentialas an output. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. It should not exceed 250MHzin terms of its output frequency. It consumes 50μA of quiescent current without being affected by external factors. Currently, there are 14 terminations. Members of the 74ABT74family make up this object. A voltage of 5V is used to power it. A JK flip flop with a 3pFfarad input capacitance is used here. It belongs to the family of electronic devices known as ABT. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. Its superior flexibility is attributed to its use of 2 circuits. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74ABT74DB,118 Features
Tape & Reel (TR) package
74ABT series
14 pins
74ABT74DB,118 Applications
There are a lot of Nexperia USA Inc. 74ABT74DB,118 Flip Flops applications.
- Reduced system switching noise
- ESCC
- ATE
- Clock pulse
- Matched Rise and Fall
- Patented noise
- Bounce elimination switch
- Automotive
- 2 – Bit synchronous counter
- Single Down Count-Control Line
