74ABT74N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 15mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 4 ns |
| Power Supply Current-Max (ICC) | 0.05mA |
| RoHS Status | ROHS3 Compliant |
74ABT74N,112 Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). You can find it in the Tubepackage. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The 74ABTseries comprises this type of FPGA. There should be no greater frequency than 250MHzon its output. A total of 2 elements are present. T flip flop consumes 50μA quiescent energy. Terminations are 14. You can search similar parts based on 74ABT74. It is powered by a voltage of 5V . This JK flip flop has a 3pFfarad input capacitance. An electronic device belonging to the family ABTcan be found here. The part is included in FF/Latches. 5.5Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. A power supply of 5Vis required to operate it.
74ABT74N,112 Features
Tube package
74ABT series
5V power supplies
74ABT74N,112 Applications
There are a lot of NXP USA Inc. 74ABT74N,112 Flip Flops applications.
- Data Synchronizers
- Shift registers
- Synchronous counter
- High Performance Logic for test systems
- Pattern generators
- Dynamic threshold performance
- Differential Individual
- Patented noise
- Balanced 24 mA output drivers
- Safety Clamp
