74ABT821D,602
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 24-SO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 185MHz |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| RoHS Status | ROHS3 Compliant |
74ABT821D,602 Overview
In the form of 24-SOIC (0.295, 7.50mm Width), it has been packaged. D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. The 74ABTseries comprises this type of FPGA. It should not exceed 185MHzin terms of its output frequency. A total of 1elements are present in it. There is 250μA quiescent consumption. This T flip flop has a capacitance of 4pF farads at the input.
74ABT821D,602 Features
Tube package
74ABT series
74ABT821D,602 Applications
There are a lot of Rochester Electronics, LLC 74ABT821D,602 Flip Flops applications.
- Matched Rise and Fall
- Registers
- Divide a clock signal by 2 or 4
- ESCC
- 2 – Bit synchronous counter
- Computing
- Power down protection
- Consumer
- Memory
- Shift Registers
