74ABT821D,623
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT821 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 185MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.7 ns |
| Power Supply Current-Max (ICC) | 38mA |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT821D,623 Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. It belongs to the 74ABTseries of FPGAs. A frequency of 185MHzshould be the maximum output frequency. In total, it contains 1 elements. As a result, it consumes 250μA quiescent current. The number of terminations is 24. It is a member of the 74ABT821 family. An input voltage of 5Vpowers the D latch. There is 4pF input capacitance for this T flip flop. A device of this type belongs to the family of ABT. This device is part of the FF/Latchesbase part number family. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 4.5V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. A total of 5V power supplies are needed to run it. This flip flop has a total of 2ports. There is also a characteristic of POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET.
74ABT821D,623 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT821D,623 Applications
There are a lot of NXP USA Inc. 74ABT821D,623 Flip Flops applications.
- Data storage
- Instrumentation
- Balanced 24 mA output drivers
- Supports Live Insertion
- Memory
- Safety Clamp
- High Performance Logic for test systems
- Frequency Divider circuits
- Data transfer
- Cold spare funcion
