74AC109PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 175MHz |
| Family | AC |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
74AC109PC Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. T flip flop uses Differentialas the output. The trigger configured with it uses Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type JK Type. It belongs to the 74ACseries of FPGAs. This D flip flop should not have a frequency greater than 175MHz. There are 2 elements in it. This process consumes 2μA quiescents. There have been 16 terminations. An input voltage of 3.3Vpowers the D latch. The input capacitance of this JK flip flopis 4.5pF farads. ACis the family of this D flip flop. There is a 6Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V.
74AC109PC Features
Tube package
74AC series
74AC109PC Applications
There are a lot of Rochester Electronics, LLC 74AC109PC Flip Flops applications.
- Computing
- Divide a clock signal by 2 or 4
- Data storage
- Registers
- Convert a momentary switch to a toggle switch
- Differential Individual
- 2 – Bit synchronous counter
- Synchronous counter
- Bus hold
- Instrumentation
