74AC11074N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 3V~5.5V |
| Base Part Number | 74AC11074 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 12.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.2 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC11074N Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. D flip flop is embedded in the Tube package. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. It is mounted in the way of Through Hole. Powered by a 3V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74AC series. It should not exceed 150MHzin its output frequency. The 74AC11074 family contains this object. JK flip flop input capacitance is 3.5pF farads. Electronic part Through Holeis mounted in the way. This board is designed with 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The superior flexibility of this product is achieved by using 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 24mA, it is possible to design the device in any way you want. It operates with 1 output lines. Quiescent current is consumed by the D latch in the amount of 4μA.
74AC11074N Features
Tube package
74AC series
14 pins
74AC11074N Applications
There are a lot of Texas Instruments 74AC11074N Flip Flops applications.
- Counters
- EMI reduction circuitry
- Reduced system switching noise
- Supports Live Insertion
- Buffered Clock
- Patented noise
- Convert a momentary switch to a toggle switch
- Cold spare funcion
- Balanced Propagation Delays
- Common Clocks
