74AC11074PWR
| Parameters | |
|---|---|
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AC11074 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 12.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.2 ns |
74AC11074PWR Overview
As a result, it is packaged as 14-TSSOP (0.173, 4.40mm Width). The package Cut Tape (CT)contains it. Differentialis the output configured for it. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 3V~5.5Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74AC series. There should be no greater frequency than 150MHzon its output. It has been determined that there have been 14 terminations. Members of the 74AC11074family make up this object. A voltage of 5V is used to power it. A JK flip flop with a 3.5pFfarad input capacitance is used here. It is a member of the ACfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. This board has 14 pins. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The supply voltage (Vsup) should be kept above 3V for normal operation. Despite its superior flexibility, it relies on 2 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility. There are no output lines on the JK flip flop. 4μAquiescent current consumed.
74AC11074PWR Features
Cut Tape (CT) package
74AC series
14 pins
74AC11074PWR Applications
There are a lot of Texas Instruments 74AC11074PWR Flip Flops applications.
- Single Up Count-Control Line
- QML qualified product
- Matched Rise and Fall
- Data transfer
- Test & Measurement
- Buffered Clock
- Memory
- Guaranteed simultaneous switching noise level
- Automotive
- Shift Registers
