74AC174MTC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 125MHz |
| Family | AC |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74AC174MTC Overview
It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tube package. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74AC series. There should be no greater frequency than 125MHzon its output. The element count is 1 . T flip flop consumes 40μA quiescent energy. The number of terminations is 16. There is 4.5pF input capacitance for this T flip flop. An electronic device belonging to the family ACcan be found here. As soon as 6Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be above 2V.
74AC174MTC Features
Tube package
74AC series
74AC174MTC Applications
There are a lot of Rochester Electronics, LLC 74AC174MTC Flip Flops applications.
- Single Up Count-Control Line
- Load Control
- ATE
- Latch
- Divide a clock signal by 2 or 4
- Memory
- Computing
- Instrumentation
- Consumer
- Shift registers
