74AC174PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 125MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| RoHS Status | ROHS3 Compliant |
74AC174PC Overview
The package is in the form of 16-DIP (0.300, 7.62mm). Package Tubeembeds it. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74AC series. A frequency of 125MHzshould not be exceeded by its output. The element count is 1 . As a result, it consumes 40μA quiescent current and is not affected by external forces. There is 4.5pF input capacitance for this T flip flop.
74AC174PC Features
Tube package
74AC series
74AC174PC Applications
There are a lot of Rochester Electronics, LLC 74AC174PC Flip Flops applications.
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Reduced system switching noise
- Single Down Count-Control Line
- ATE
- Latch-up performance
- QML qualified product
- Circuit Design
- Buffered Clock
- Data Synchronizers
