74AC175SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 244MHz |
| Base Part Number | 74AC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 4 |
| Clock Frequency | 244MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC175SCX Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Differential. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 244MHzin its output frequency. The list contains 1 elements. As a result, it consumes 40μA of quiescent current without being affected by external factors. It is a member of the 74AC175 family. Its input capacitance is 4.5pF farads. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. 4bits are used in its design. The superior flexibility is achieved through the use of 4 circuits. In order to operate, the chip has 2 output lines. This input has 1lines in it. There is -24mA output current at the high level. A 24mAvalue is set for low-level output current. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. In order for it to operate, a supply voltage of 2Vis required. It is capable of supporting a maximum supply voltage of 6V. This frequency can be achieved at 244MHz.
74AC175SCX Features
Tape & Reel (TR) package
74AC series
16 pins
4 Bits
74AC175SCX Applications
There are a lot of ON Semiconductor 74AC175SCX Flip Flops applications.
- Frequency Divider circuits
- Latch-up performance
- Circuit Design
- Patented noise
- Buffered Clock
- Test & Measurement
- Data Synchronizers
- CMOS Process
- Supports Live Insertion
- Control circuits
