74AC273SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 175MHz |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC273SC Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tubepackage. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74ACseries of FPGAs. It should not exceed 175MHzin its output frequency. In total, there are 1 elements. There is a consumption of 40μAof quiescent energy. If you search by 74AC273, you will find similar parts. This JK flip flop has a 4.5pFfarad input capacitance. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. Due to its superior flexibility, it uses 8 circuits. With an output current of 24mA, it is possible to design the device in any way you want. It operates with 8 output lines. This input has 3lines. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cis recommended for operation. It should be higher than -40°Cwhen the system is operating. The minimum voltage required for operation is 2V. It is capable of supporting a maximum supply voltage of 6V. This can be achieved at a frequency of 175MHz.
74AC273SC Features
Tube package
74AC series
20 pins
8 Bits
74AC273SC Applications
There are a lot of ON Semiconductor 74AC273SC Flip Flops applications.
- Parallel data storage
- ESD protection
- Differential Individual
- Data transfer
- Balanced Propagation Delays
- Memory
- Circuit Design
- Patented noise
- Digital electronics systems
- Test & Measurement
