74AC374MTC
| Parameters | |
|---|---|
| Voltage - Supply | 2V~6V |
| Frequency | 155MHz |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
74AC374MTC Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. Package Tubeembeds it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74ACseries FPGA. There should be no greater frequency than 155MHzon its output. The list contains 1 elements. Despite external influences, it consumes 40μAof quiescent current. The object belongs to the 74AC374 family. Input capacitance of this device is 4.5pF farads. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. The design is based on 8bits. To achieve this superior flexibility, 8 circuits are used. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 8 output lines on it. It is reported that there are 1 input lines. -24mAis the output current at high level. A 24mAvalue is set for low-level output current. It is recommended that the operating temperature be below 85°C. Ideally, the operating temperature should be higher than -40°C. The minimum voltage required for operation is 2V. It supports the maximal supply voltage of 6V. The frequency that can be achieved is 155MHz.
74AC374MTC Features
Tube package
74AC series
20 pins
8 Bits
74AC374MTC Applications
There are a lot of ON Semiconductor 74AC374MTC Flip Flops applications.
- Asynchronous counter
- ESD performance
- Data storage
- Data Synchronizers
- Single Up Count-Control Line
- Safety Clamp
- Registers
- Cold spare funcion
- Counters
- Individual Asynchronous Resets
