Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Supplier Device Package |
20-SOIC |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Series |
74AC |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
D-Type |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
2V~6V |
Frequency |
125MHz |
Base Part Number |
74AC377 |
Function |
Standard |
Output Type |
Non-Inverted |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Number of Circuits |
8 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Output Current |
24mA |
Number of Bits |
8 |
Clock Frequency |
175MHz |
Propagation Delay |
14.5 ns |
Turn On Delay Time |
6 ns |
Logic Function |
D-Type, Flip-Flop |
Current - Quiescent (Iq) |
40μA |
Current - Output High, Low |
24mA 24mA |
Number of Bits per Element |
8 |
Max Propagation Delay @ V, Max CL |
9ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
High Level Output Current |
-24mA |
Input Capacitance |
4.5pF |
Low Level Output Current |
24mA |
Number of Input Lines |
1 |
Number of Output Lines |
8 |
Clock Edge Trigger Type |
Positive Edge |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74AC377SC Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. A package named Tubeincludes it. The output it is configured with uses Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74AC series. It should not exceed 175MHzin terms of its output frequency. The list contains 1 elements. There is 40μA quiescent consumption. The 74AC377 family contains it. Its input capacitance is 4.5pFfarads. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This flip flop is designed with 8 Bits. The superior flexibility is achieved through the use of 8 circuits. It offers maximum design flexibility with its output current of 24mA. In order to operate, the chip has 8 output lines. A total of 1input lines have been provided. -24mAis set as the high level output current. The low level output current is set to 24mA. A temperature below 85°Cshould be used for operation. Temperatures above -40°Cshould be used. The system operates with a minimum supply voltage of 2V. It is capable of supporting a maximum supply voltage of 6V. It is possible to obtain a frequency of 125MHz.
74AC377SC Features
Tube package
74AC series
20 pins
8 Bits
74AC377SC Applications
There are a lot of ON Semiconductor 74AC377SC Flip Flops applications.
- Control circuits
- Count Modes
- Asynchronous counter
- Latch
- Power down protection
- QML qualified product
- Communications
- Data Synchronizers
- Safety Clamp
- Single Up Count-Control Line