74AC377SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 175MHz |
| Base Part Number | 74AC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC377SJ Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. In the configuration, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. This type of FPGA is a part of the 74AC series. You should not exceed 175MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 40μA quiescent current. The object belongs to the 74AC377 family. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. This flip flop is designed with 8 Bits. Its flexibility is enhanced by 8 circuits. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 1 input lines present. The high level output current is set to -24mA. In the low level output current setting, 24mAis used. A temperature below 85°Cis recommended for operation. Ideally, the operating temperature should be greater than -40°C. The system operates with a minimum supply voltage of 2V. A maximum voltage of 6V can be provided by it. We are able to achieve a frequency of 175MHz.
74AC377SJ Features
Tube package
74AC series
20 pins
8 Bits
74AC377SJ Applications
There are a lot of ON Semiconductor 74AC377SJ Flip Flops applications.
- Asynchronous counter
- Shift Registers
- Individual Asynchronous Resets
- Automotive
- Reduced system switching noise
- Digital electronics systems
- Frequency Divider circuits
- Set-reset capability
- Functionally equivalent to the MC10/100EL29
- Buffer registers
