74AC574SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 153MHz |
| Base Part Number | 74AC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Clock Frequency | 153MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC574SJ Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. The 74ACseries comprises this type of FPGA. It should not exceed 153MHzin terms of its output frequency. In total, there are 1 elements. As a result, it consumes 40μA quiescent current and is not affected by external forces. This D latch belongs to the family of 74AC574. A 4.5pFfarad input capacitance is provided by this T flip flop. It is mounted in the way of Surface Mount. There are 20pins on it. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 8. The superior flexibility of this circuit is achieved by using 8 circuits. In order for the chip to function, it has 3output lines. The number of input lines is 1. High level output current is set to -24mA. 24mA is the low level output current. Ideally, the operating temperature should be lower than 85°C. It should be higher than -40°Cwhen the system is operating. The minimum voltage required for operation is 2V. It supports a maximum supply voltage of 6V volts. This frequency can be achieved at 153MHz.
74AC574SJ Features
Tube package
74AC series
20 pins
8 Bits
74AC574SJ Applications
There are a lot of ON Semiconductor 74AC574SJ Flip Flops applications.
- Consumer
- Computers
- Dynamic threshold performance
- Computing
- Balanced 24 mA output drivers
- ESD protection
- Test & Measurement
- ESCC
- Differential Individual
- Instrumentation
