74ACT109PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 210MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
74ACT109PC Overview
16-DIP (0.300, 7.62mm)is the way it is packaged. You can find it in the Tubepackage. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is JK Type. The FPGA belongs to the 74ACT series. It should not exceed 210MHzin terms of its output frequency. The list contains 2 elements. It consumes 20μA of quiescent There have been 16 terminations. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. Devices in the ACTfamily are electronic devices. The maximal supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V.
74ACT109PC Features
Tube package
74ACT series
74ACT109PC Applications
There are a lot of Rochester Electronics, LLC 74ACT109PC Flip Flops applications.
- CMOS Process
- Memory
- ESD performance
- Instrumentation
- Dynamic threshold performance
- Guaranteed simultaneous switching noise level
- Single Up Count-Control Line
- Event Detectors
- Computing
- Matched Rise and Fall
