74ACT16374DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT16374 |
| Function | Standard |
| Output Voltage | 5V |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Power Dissipation | 1.2W |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 65MHz |
| Propagation Delay | 10.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.8 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16374DL Overview
48-BSSOP (0.295, 7.50mm Width)is the packaging method. You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ACTseries of FPGAs. This D flip flop should not have a frequency greater than 65MHz. In total, there are 2 elements. 48terminations have occurred. D latch belongs to the 74ACT16374 family. Power is provided by a 5V supply. This T flip flop has a capacitance of 4.5pF farads at the input. Devices in the ACTfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. This board is designed with 48pins on it. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 16bits. An electrical current of 5V volts is applied to it. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be kept at 5V. Its output current of 24mAallows for maximum design flexibility. There are 3 output lines on it. This input has 1lines in it. It consumes 8μA current.
74ACT16374DL Features
Tube package
74ACT series
48 pins
16 Bits
5V power supplies
74ACT16374DL Applications
There are a lot of Texas Instruments 74ACT16374DL Flip Flops applications.
- Consumer
- Memory
- Functionally equivalent to the MC10/100EL29
- Buffer registers
- Frequency division
- Single Down Count-Control Line
- Set-reset capability
- Automotive
- Shift Registers
- Differential Individual
