74ACT16374SSCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 71MHz |
| Base Part Number | 74ACT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 16 |
| Clock Frequency | 71MHz |
| Propagation Delay | 7.9 ns |
| Turn On Delay Time | 5.1 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 16 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT16374SSCX Overview
The flip flop is packaged in a case of 48-BSSOP (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74ACT series. It should not exceed 71MHzin terms of its output frequency. There are 2 elements in it. As a result, it consumes 80μA quiescent current and is not affected by external forces. Members of the 74ACT16374family make up this object. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic part is mounted in the way of Surface Mount. It is designed with 48 pins. This device's clock edge trigger type is Positive Edge. This flip flop is designed with 16 Bits. Its flexibility is enhanced by 8 circuits. The supply voltage should be maintained at 5V for high efficiency. In order for the chip to function, it has 16output lines. Currently, there are 2 input lines present. It is set to -24mAfor the high level output current. There is no low level output current set at 24mA. A temperature below 85°Cshould be used for operation. In order for the system to operate properly, the temperature should be higher than -40°C. It is powered by 4.5V as its minimum supply voltage. A maximum voltage of 5.5V can be provided by it. This frequency can be achieved at 71MHz.
74ACT16374SSCX Features
Tape & Reel (TR) package
74ACT series
48 pins
16 Bits
74ACT16374SSCX Applications
There are a lot of ON Semiconductor 74ACT16374SSCX Flip Flops applications.
- Power down protection
- ATE
- Patented noise
- Matched Rise and Fall
- Computers
- Single Up Count-Control Line
- Buffered Clock
- EMI reduction circuitry
- ESCC
- Digital electronics systems
