74ACT16823DLG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 18 |
| Clock Frequency | 90MHz |
| Propagation Delay | 12.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 11.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16823DLG4 Overview
As a result, it is packaged as 56-BSSOP (0.295, 7.50mm Width). You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ACT series. Its output frequency should not exceed 90MHz Hz. In total, there are 2 elements. Terminations are 56. The object belongs to the 74ACT16823 family. A voltage of 5V is used to power it. A 3pFfarad input capacitance is provided by this T flip flop. Devices in the ACTfamily are electronic devices. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 56 pins. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 18 Bits. Its superior flexibility is attributed to its use of 1 circuits. The system runs on a power supply of 5V watts. A total of 2ports are embedded in the D flip flop. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With an output current of 24mA, this device offers maximum design flexibility. In order for the chip to function, it has 3output lines. There is 8μA quiescent current consumption by it.
74ACT16823DLG4 Features
Tube package
74ACT series
56 pins
18 Bits
5V power supplies
74ACT16823DLG4 Applications
There are a lot of Texas Instruments 74ACT16823DLG4 Flip Flops applications.
- Memory
- Guaranteed simultaneous switching noise level
- Safety Clamp
- Data Synchronizers
- Convert a momentary switch to a toggle switch
- Instrumentation
- Power down protection
- Pattern generators
- Event Detectors
- Frequency Dividers
