74ACT175PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 236MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ACT175PC Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). It is included in the package Tube. There is a Differentialoutput configured with it. In the configuration of the trigger, Positive Edgeis used. Through Holeis occupied by this electronic component. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. It belongs to the 74ACTseries of FPGAs. Its output frequency should not exceed 236MHz Hz. The element count is 1 . It consumes 40μA of quiescent It has been determined that there have been 16 terminations. A voltage of 5V is used to power it. Its input capacitance is 4.5pFfarads. A device of this type belongs to the family of ACT. As soon as 5.5Vis reached, Vsup reaches its maximum value.
74ACT175PC Features
Tube package
74ACT series
74ACT175PC Applications
There are a lot of Rochester Electronics, LLC 74ACT175PC Flip Flops applications.
- Differential Individual
- Instrumentation
- Safety Clamp
- Matched Rise and Fall
- Load Control
- Clock pulse
- Communications
- Frequency Dividers
- Balanced 24 mA output drivers
- Bus hold
