74ACT374MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74ACT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT374MTC Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The Tubepackage contains it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74ACT series. You should not exceed 160MHzin the output frequency of the device. There are 1 elements in it. It consumes 40μA of quiescent The 74ACT374 family contains this object. Its input capacitance is 4.5pF farads. There is an electronic part mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. It is designed with 8bits. To achieve this superior flexibility, 8 circuits are used. High efficiency requires the supply voltage to be maintained at 5V. There are no output lines on the JK flip flop. This input has 1lines. It is set to -24mAfor the high level output current. A 24mAvalue is set for low-level output current. If the operating temperature is lower than 85°C, it is recommended. It should be higher than -40°Cwhen the system is operating. It is powered by 4.5V as its minimum supply voltage. 5.5Vis its maximum supply voltage. It is possible to achieve a frequency of 160MHz.
74ACT374MTC Features
Tube package
74ACT series
20 pins
8 Bits
74ACT374MTC Applications
There are a lot of ON Semiconductor 74ACT374MTC Flip Flops applications.
- ESD performance
- Latch
- Shift registers
- Control circuits
- Buffered Clock
- 2 – Bit synchronous counter
- Event Detectors
- Common Clocks
- Patented noise
- Clock pulse
