74ACT374MTR
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 260MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
74ACT374MTR Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74ACTseries of FPGAs. A frequency of 260MHzshould be the maximum output frequency. In total, there are 1 elements. There is a consumption of 4μAof quiescent energy. A total of 20terminations have been recorded. This D latch belongs to the family of 74ACT374. A voltage of 5V provides power to the D latch. A 3pFfarad input capacitance is provided by this T flip flop. Devices in the ACTfamily are electronic devices. Surface Mount mounts this electronic component. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. The superior flexibility is achieved through the use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. The D flip flop has no ports embedded. In order to ensure high efficiency, the supply voltage should remain at 5V. In order for the chip to function, it has 3output lines.
74ACT374MTR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
74ACT374MTR Applications
There are a lot of STMicroelectronics 74ACT374MTR Flip Flops applications.
- Buffer registers
- Automotive
- Individual Asynchronous Resets
- Parallel data storage
- Buffered Clock
- Dynamic threshold performance
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Balanced 24 mA output drivers
- Count Modes
