74ACTQ273SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 189MHz |
| Base Part Number | 74ACTQ273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 189MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ273SJ Overview
The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). The Tubepackage contains it. The output it is configured with uses Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74ACTQ series. It should not exceed 189MHzin terms of its output frequency. D latch consists of 1 elements. Despite external influences, it consumes 40μAof quiescent current. The 74ACTQ273 family contains this object. Its input capacitance is 4.5pFfarads. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. In this device, the clock edge trigger type is Positive Edge. 8bits are used in its design. Its superior flexibility is attributed to its use of 8 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. To operate, the chip has a total of 8 output lines. It has 8lines. There is -24mA output current at the high level. In the low level output current setting, 24mAis used. If the operating temperature is lower than 85°C, it is recommended. Operating temperatures should be above -40°C. In order for it to operate, a supply voltage of 4.5Vis required. It supports a maximum supply voltage of 5.5V volts. The frequency can be set to 189MHz.
74ACTQ273SJ Features
Tube package
74ACTQ series
20 pins
8 Bits
74ACTQ273SJ Applications
There are a lot of ON Semiconductor 74ACTQ273SJ Flip Flops applications.
- Buffered Clock
- Test & Measurement
- Memory
- Functionally equivalent to the MC10/100EL29
- ATE
- Registers
- Modulo – n – counter
- Latch
- Bus hold
- Digital electronics systems
