74ACTQ374PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 85MHz |
| Base Part Number | 74ACTQ374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ374PC Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74ACTQ series. You should not exceed 85MHzin the output frequency of the device. A total of 1elements are present in it. This process consumes 40μA quiescents. The object belongs to the 74ACTQ374 family. Its input capacitance is 4.5pFfarads. Through Hole mounts this electronic component. Basically, it is designed with a set of 20 pins. A Positive Edgeclock edge trigger is used in this device. The design is based on 8bits. Using 8 circuits, it is highly flexible. High efficiency requires the supply voltage to be maintained at 5V. The JK flip flop is with 3 output lines to operate. This input has 1lines in it. There is -24mA output current at the high level. It is set to 24mAfor low level output current. Operating temperatures should be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The minimum voltage required for operation is 4.5V. There is a maximum supply voltage of 5.5V. The frequency that can be achieved is 85MHz.
74ACTQ374PC Features
Tube package
74ACTQ series
20 pins
8 Bits
74ACTQ374PC Applications
There are a lot of ON Semiconductor 74ACTQ374PC Flip Flops applications.
- Communications
- ESCC
- Counters
- Storage Registers
- Supports Live Insertion
- Data storage
- Dynamic threshold performance
- Frequency Divider circuits
- EMI reduction circuitry
- Memory
