74AHC377D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 3.9 ns |
| Turn On Delay Time | 8 ns |
| Family | AHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC377D,118 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74AHCseries of FPGAs. There should be no greater frequency than 120MHzon its output. The list contains 1 elements. There is 4μA quiescent consumption. It has been determined that there have been 20 terminations. Members of the 74AHC377family make up this object. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 3pF farads. AHCis the family of this D flip flop. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. It has a clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. Normally, the supply voltage (Vsup) should be above 2V. For high efficiency, the supply voltage should be set to 5V. In order for the chip to function, it has 8output lines.
74AHC377D,118 Features
Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
74AHC377D,118 Applications
There are a lot of Nexperia USA Inc. 74AHC377D,118 Flip Flops applications.
- Test & Measurement
- Modulo – n – counter
- Automotive
- ATE
- Computing
- Bounce elimination switch
- Common Clocks
- Set-reset capability
- Bus hold
- 2 – Bit synchronous counter
