74AHC574D,112
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 21 ns |
| Turn On Delay Time | 9 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
74AHC574D,112 Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. D flip flop is included in the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis used in the operation. This D latch has the type D-Type. JK flip flop belongs to the 74AHCseries of FPGAs. You should not exceed 115MHzin its output frequency. D latch consists of 1 elements. During its operation, it consumes 4μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74AHC574 family contains this object. A voltage of 5V is used to power it. There is 3pF input capacitance for this T flip flop. An electronic device belonging to the family AHC/VHC/H/U/Vcan be found here. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. There are 8bits in this flip flop. For normal operation, the supply voltage (Vsup) should be above 2V. The flip flop has 2ports embedded within it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It has 8lines. In addition, BROADSIDE VERSION OF 374is a characteristic of it.
74AHC574D,112 Features
Tube package
74AHC series
20 pins
8 Bits
74AHC574D,112 Applications
There are a lot of Nexperia USA Inc. 74AHC574D,112 Flip Flops applications.
- Matched Rise and Fall
- Frequency division
- Common Clocks
- Single Up Count-Control Line
- Circuit Design
- Data transfer
- Supports Live Insertion
- Dynamic threshold performance
- Divide a clock signal by 2 or 4
- Individual Asynchronous Resets
