74ALVC162374T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.65V~3.6V |
| Frequency | 200MHz |
| Base Part Number | 74ALVC162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 16 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5.3 ns |
| Turn On Delay Time | 3.9 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.9ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -6mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 6mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ALVC162374T Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ALVCseries contain this type of chip. Its output frequency should not exceed 250MHz Hz. A total of 2elements are present in it. There is a consumption of 40μAof quiescent energy. It is a member of the 74ALVC162374 family. A JK flip flop with a 6pFfarad input capacitance is used here. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 48 pins. The clock edge trigger type for this device is Positive Edge. It is designed with a number of bits of 16. To achieve this superior flexibility, 16 circuits are used. There are 3 output lines on it. Currently, there are 8 input lines present. A high level output current of -6mAis set. It is set to 6mAfor the low level output current. Temperatures below 85°Care ideal for operating. Ideally, the operating temperature should be greater than -40°C. It operates with the minimal supply voltage of 1.65V. 3.6Vis the maximum supply voltage supported by it. This frequency can be achieved at 200MHz.
74ALVC162374T Features
Tube package
74ALVC series
48 pins
16 Bits
74ALVC162374T Applications
There are a lot of ON Semiconductor 74ALVC162374T Flip Flops applications.
- Buffer registers
- Asynchronous counter
- ESD performance
- Count Modes
- Single Down Count-Control Line
- Frequency Divider circuits
- Memory
- Memory
- Latch
- Synchronous counter
