74ALVCH16374DL,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 350MHz |
| Propagation Delay | 2.3 ns |
| Quiescent Current | 200nA |
| Turn On Delay Time | 2.4 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74ALVCH16374DL,112 Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tube package. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 1.2V~3.6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ALVCHseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 350MHz. The element count is 2 . Despite external influences, it consumes 40μAof quiescent current. Currently, there are 48 terminations. If you search by 74ALVCH16374, you will find similar parts. The power source is powered by 3.3V. JK flip flop input capacitance is 5pF farads. Devices in the ALVC/VCX/Afamily are electronic devices. Surface Mount mounts this electronic component. A total of 48pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. There are 16bits in this flip flop. As soon as 3.6Vis reached, Vsup reaches its maximum value. The D flip flop has no ports embedded. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There is a consumption of 200nAof quiescent current from it.
74ALVCH16374DL,112 Features
Tube package
74ALVCH series
48 pins
16 Bits
74ALVCH16374DL,112 Applications
There are a lot of Nexperia USA Inc. 74ALVCH16374DL,112 Flip Flops applications.
- 2 – Bit synchronous counter
- Safety Clamp
- ESCC
- Computing
- Functionally equivalent to the MC10/100EL29
- Circuit Design
- EMI reduction circuitry
- Instrumentation
- Event Detectors
- Shift Registers
