74ALVCH16374T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.65V~3.6V |
| Frequency | 150MHz |
| Base Part Number | 74ALVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 16 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ALVCH16374T Overview
48-TFSOP (0.240, 6.10mm Width)is the packaging method. As part of the package Tube, it is embedded. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. In this case, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ALVCHseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 150MHz. A total of 2elements are contained within it. It consumes 40μA of quiescent The 74ALVCH16374 family contains it. JK flip flop input capacitance is 6pF farads. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. This device has Positive Edgeas its clock edge trigger type. An electronic part with 16bits has been designed. The superior flexibility of this product is achieved by using 16 circuits. It is designed with 3 output lines. Currently, there are 8 input lines present. A -24mAvalue is set for the high level output current. Low level output current is set to 24mA. It is recommended that the operating temperature be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The minimal supply voltage is 1.65V. 3.6Vis its maximum supply voltage. This frequency can be achieved at 150MHz.
74ALVCH16374T Features
Tube package
74ALVCH series
48 pins
16 Bits
74ALVCH16374T Applications
There are a lot of ON Semiconductor 74ALVCH16374T Flip Flops applications.
- CMOS Process
- Set-reset capability
- Counters
- Balanced Propagation Delays
- Matched Rise and Fall
- Buffered Clock
- Guaranteed simultaneous switching noise level
- Event Detectors
- Latch
- ESCC
