74ALVCH16821DL,512
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE AT VOLTAGE 3-3.6 |
| Technology | CMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVCH16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Clock Frequency | 350MHz |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.6 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74ALVCH16821DL,512 Overview
As a result, it is packaged as 56-BSSOP (0.295, 7.50mm Width). It is contained within the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2.3V~2.7V 3V~3.6V. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74ALVCH series. In order for it to function properly, its output frequency should not exceed 350MHz. In total, it contains 2 elements. There is a consumption of 40μAof quiescent energy. A total of 56terminations have been recorded. The 74ALVCH16821 family contains this object. A voltage of 2.5V provides power to the D latch. This JK flip flop has a 5pFfarad input capacitance. This D flip flop belongs to the family of ALVC/VCX/A. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 56. The clock edge trigger type for this device is Positive Edge. The flip flop is designed with 10bits. The flip flop has 2embedded ports. In order to operate, the chip has 10 output lines. CAN ALSO OPERATE AT VOLTAGE 3-3.6is also one of its characteristics.
74ALVCH16821DL,512 Features
Tube package
74ALVCH series
56 pins
10 Bits
74ALVCH16821DL,512 Applications
There are a lot of Nexperia USA Inc. 74ALVCH16821DL,512 Flip Flops applications.
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Frequency Divider circuits
- Functionally equivalent to the MC10/100EL29
- Counters
- Automotive
- Set-reset capability
- Matched Rise and Fall
- Memory
- Single Down Count-Control Line
