74F273SC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 160MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 44mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| Height Seated (Max) | 2.642mm |
| Width | 7.493mm |
| RoHS Status | ROHS3 Compliant |
74F273SC Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. T flip flop uses Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74F series. Its output frequency should not exceed 160MHz Hz. A total of 1elements are contained within it. It consumes 44mA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used to power it. In this case, the D flip flop belongs to the F/FASTfamily. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
74F273SC Features
Tube package
74F series
74F273SC Applications
There are a lot of Rochester Electronics, LLC 74F273SC Flip Flops applications.
- Modulo – n – counter
- Latch-up performance
- Registers
- Individual Asynchronous Resets
- Synchronous counter
- Computers
- Frequency Divider circuits
- QML qualified product
- 2 – Bit synchronous counter
- Pattern generators
