74F273SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74F273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 44mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F273SJ Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tubepackage. Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. 0°C~70°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74Fseries FPGA. You should not exceed 160MHzin its output frequency. The list contains 1 elements. As a result, it consumes 44mA of quiescent current without being affected by external factors. This D latch belongs to the family of 74F273. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. The design is based on 8bits. The superior flexibility is achieved through the use of 8 circuits. In order to achieve high efficiency, the supply voltage should be maintained at 5V. To operate, the chip has a total of 3 output lines. This input has 8lines. High level output current is set to -1mA. 20mAis set as the low level output current. A temperature below 70°Cshould be used for operation. Operating temperatures should be above 0°C. In order for it to operate, a supply voltage of 4.5Vis required. There is a maximum supply voltage of 5.5V. This frequency can be achieved at 160MHz.
74F273SJ Features
Tube package
74F series
20 pins
8 Bits
74F273SJ Applications
There are a lot of ON Semiconductor 74F273SJ Flip Flops applications.
- ESD performance
- Memory
- Synchronous counter
- Buffer registers
- Storage registers
- Consumer
- ATE
- Matched Rise and Fall
- Circuit Design
- Single Up Count-Control Line
