74F378PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74F378 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 6 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | D-Type |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | 20mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 6 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F378PC Overview
It is packaged in the way of 16-DIP (0.300, 7.62mm). It is contained within the Tubepackage. T flip flop is configured with an output of Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holemounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. It belongs to the 74Fseries of FPGAs. Its output frequency should not exceed 100MHz. A total of 1elements are present in it. During its operation, it consumes 45mA quiescent energy. The 74F378 family contains it. In this case, the electronic component is mounted in the way of Through Hole. 16pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. Flip flops designed with 6bits are used in this part. Despite its superior flexibility, it relies on 7 circuits to achieve it. It operates with 6 output lines. A total of 6input lines have been provided. There is 20mA output current at the high level. 20mA is the low level output current. A temperature below 70°Cis recommended for operation. Ideally, the operating temperature should be greater than 0°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. 5.5Vis its maximum supply voltage. 100MHzis the maximum frequency that can be achieved.
74F378PC Features
Tube package
74F series
16 pins
6 Bits
74F378PC Applications
There are a lot of ON Semiconductor 74F378PC Flip Flops applications.
- Data transfer
- 2 – Bit synchronous counter
- High Performance Logic for test systems
- Communications
- Matched Rise and Fall
- Balanced 24 mA output drivers
- Reduced system switching noise
- Memory
- ESD protection
- Consumer
