74F379SC
| Parameters | |
|---|---|
| Current - Quiescent (Iq) | 40mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 140MHz |
| Base Part Number | 74F379 |
| Function | Standard |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5 ns |
74F379SC Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The package Tubecontains it. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. 0°C~70°C TAis the operating temperature. This D latch has the type D-Type. The FPGA belongs to the 74F series. There should be no greater frequency than 140MHzon its output. In total, it contains 1 elements. There is a consumption of 40mAof quiescent energy. JK flip flop belongs to 74F379 family. There is an electronic part mounted in the way of Surface Mount. This board has 16 pins. Its clock edge trigger type is Positive Edge. Flip flops designed with 4bits are used in this part. To achieve this superior flexibility, 4 circuits are used. Optimal efficiency requires a supply voltage of 5V. To operate, the chip has a total of 3 output lines. A total of 4input lines have been provided. It is set to -1mAfor the high level output current. Low level output current is set to 20mA. It is recommended that the operating temperature be below 70°C. Temperatures above 0°Cshould be used. It operates with the minimal supply voltage of 4.5V. There is a maximum voltage support of 5.5V. It is possible to achieve a frequency of 140MHz.
74F379SC Features
Tube package
74F series
16 pins
4 Bits
74F379SC Applications
There are a lot of ON Semiconductor 74F379SC Flip Flops applications.
- Instrumentation
- Patented noise
- Storage registers
- Circuit Design
- Storage Registers
- Balanced Propagation Delays
- Frequency division
- Counters
- Control circuits
- CMOS Process
