74F574PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74F574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 86mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F574PC Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74F series. A frequency of 100MHzshould not be exceeded by its output. A total of 1elements are present in it. As a result, it consumes 86mA of quiescent current without being affected by external factors. If you search by 74F574, you will find similar parts. The electronic part is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. This flip flop is designed with 8 Bits. Despite its superior flexibility, it relies on 8 circuits to achieve it. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 24mA. It is designed with 3 output lines. Currently, there are 1 input lines present. High level output current is set to -3mA. There is no low level output current set at 24mA. Temperatures below 70°Care ideal for operating. A temperature above 0°Cshould be used for the operation. It operates with the minimal supply voltage of 4.5V. A maximum voltage of 5.5V can be provided by it. The frequency that can be achieved is 100MHz.
74F574PC Features
Tube package
74F series
20 pins
8 Bits
74F574PC Applications
There are a lot of ON Semiconductor 74F574PC Flip Flops applications.
- Shift registers
- Single Up Count-Control Line
- Computers
- Buffer registers
- Storage Registers
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Data storage
- Common Clocks
- Single Down Count-Control Line
