74F74SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 125MHz |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 125MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F74SJX Overview
In the form of 14-SOIC (0.209, 5.30mm Width), it has been packaged. The package Tape & Reel (TR)contains it. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74Fseries of FPGAs. It should not exceed 125MHzin its output frequency. D latch consists of 2 elements. It consumes 16mA of quiescent You can search similar parts based on 74F74. There is an electronic component mounted in the way of Surface Mount. It is designed with 14 pins. This device exhibits a clock edge trigger type of Positive Edge. An electronic part with 2bits has been designed. To achieve this superior flexibility, 2 circuits are used. If high efficiency is desired, the supply voltage should be kept at 5V. It has 2 output lines to operate. The number of input lines is 4. -1mA is set as the high level output current. There is 20mA output current at the low level. Operating temperatures should be lower than 70°C. It is recommended that the operating temperature be greater than 0°C. The minimum voltage required for operation is 4.5V. There is a maximum voltage support of 5.5V. This frequency can be achieved at 125MHz.
74F74SJX Features
Tape & Reel (TR) package
74F series
14 pins
2 Bits
74F74SJX Applications
There are a lot of ON Semiconductor 74F74SJX Flip Flops applications.
- Matched Rise and Fall
- Power down protection
- Latch-up performance
- Bus hold
- Asynchronous counter
- Memory
- QML qualified product
- Data transfer
- Control circuits
- Test & Measurement
