74F794PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH READ-BACK |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 90MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 65mA |
| Current - Output High, Low | 15mA 64mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| fmax-Min | 90 MHz |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74F794PC Overview
20-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. It is configured with Tri-State, Non-Invertedas an output. It is configured with the trigger Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74Fseries of FPGAs. A frequency of 90MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 65mA quiescent current and is not affected by external forces. Currently, there are 20 terminations. Power is provided by a 5V supply. An electronic device belonging to the family F/FASTcan be found here. In this case, the maximum supply voltage (Vsup) reaches 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. WITH READ-BACKis also one of its characteristics.
74F794PC Features
Tube package
74F series
74F794PC Applications
There are a lot of Rochester Electronics, LLC 74F794PC Flip Flops applications.
- Frequency Dividers
- Control circuits
- Convert a momentary switch to a toggle switch
- Computers
- 2 – Bit synchronous counter
- Count Modes
- Automotive
- Power down protection
- Differential Individual
- Bus hold
