74F794PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 90MHz |
| Base Part Number | 74F794 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 2.5 ns |
| Current - Quiescent (Iq) | 65mA |
| Current - Output High, Low | 15mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -15mA |
| Low Level Output Current | 64mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F794PC Overview
The package is in the form of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Through Holeis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. It is operating at 0°C~70°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74Fseries FPGA. It should not exceed 90MHzin terms of its output frequency. There are 1 elements in it. There is a consumption of 65mAof quiescent energy. The 74F794 family contains this object. A part of the electronic system is mounted in the way of Through Hole. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. The flip flop is designed with 8bits. Its superior flexibility is attributed to its use of 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. To operate, the chip has a total of 2 output lines. Currently, there are 1 lines of input. A high level output current of -15mAis set. It is set to 64mAfor low level output current. Operating temperatures should be lower than 70°C. If the operating temperature is higher than 0°C, the system should operate properly. The system operates with a minimum supply voltage of 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. We are able to achieve a frequency of 90MHz.
74F794PC Features
Tube package
74F series
20 pins
8 Bits
74F794PC Applications
There are a lot of ON Semiconductor 74F794PC Flip Flops applications.
- Control circuits
- Load Control
- CMOS Process
- Data transfer
- Counters
- 2 – Bit synchronous counter
- Data storage
- Frequency Divider circuits
- Patented noise
- Bounce elimination switch
