74F825SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74F825 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 90mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F825SC Overview
The flip flop is packaged in 24-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tube package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In the operating environment, the temperature is 0°C~70°C TA. D-Typeis the type of this D latch. The 74Fseries comprises this type of FPGA. A frequency of 160MHzshould be the maximum output frequency. In total, it contains 1 elements. As a result, it consumes 90mA quiescent current and is not affected by external forces. The 74F825 family contains it. There is an electronic part that is mounted in the way of Surface Mount. This board has 24 pins. The clock edge trigger type for this device is Positive Edge. An electronic part with 8bits has been designed. Its flexibility is enhanced by 8 circuits. The supply voltage should be maintained at 5V for high efficiency. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This input has 2lines. -3mAis set as the high level output current. 24mAis set as the low level output current. There should be a temperature below 70°Cduring operation. The operating temperature should be higher than 0°C. It operates with the minimal supply voltage of 4.5V. 5.5Vis the maximum supply voltage it supports. This can be achieved at a frequency of 160MHz.
74F825SC Features
Tube package
74F series
24 pins
8 Bits
74F825SC Applications
There are a lot of ON Semiconductor 74F825SC Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Load Control
- Shift registers
- Safety Clamp
- Balanced 24 mA output drivers
- Registers
- Common Clocks
- ESD performance
- Shift Registers
- Balanced Propagation Delays
