74FCT162374CTPVG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374CTPVG8 Overview
It is embeded in SSOP case. The package Tape & Reel (TR)contains it. A total of 2 elements are present. 48terminations have occurred. The power supply voltage is 5V. Electronic devices of this type belong to the FCTfamily. The electronic part is mounted in the way of Surface Mount. A total of 48pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 16bits has been designed. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A power supply of 5Vis required to operate it. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be set to 5V. In terms of quiescent current, it consumes 500μA . A high level output current of -24mAis set. It is set to 24mAfor low level output current. There should be a temperature below 85°Cduring operation. It is recommended that the operating temperature be greater than -40°C. The system operates with a minimum supply voltage of 4.5V. There is a maximum supply voltage of 5.5V. It adopts a logic IC of type BUS DRIVER. A total of 2 functions are provided by this T flip flop. The D latch is equipped with 48 pins.
74FCT162374CTPVG8 Features
Tape & Reel (TR) package
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT162374CTPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374CTPVG8 Flip Flops applications.
- Storage Registers
- ESCC
- Memory
- Data Synchronizers
- Frequency Divider circuits
- Patented noise
- Shift registers
- Pattern generators
- Shift Registers
- Storage registers
