74FCT162374ETPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 3.7 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 4.4 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162374ETPAG Overview
The item is packaged in TSSOPcases. In total, there are 2 elements. There have been 48 terminations. A voltage of 5V provides power to the D latch. It is a member of the FCTfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. This board is designed with 48pins on it. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. There are 16bits in its design. It runs on 5Vvolts of power. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to achieve high efficiency, the supply voltage should be maintained at 5V. 500μAquiescent current consumed. A high level output current of -24mAis set. 24mAis set as the low level output current. Ideally, the operating temperature should be lower than 85°C. Ideally, the operating temperature should be greater than -40°C. In order for it to operate, a supply voltage of 4.5Vis required. 5.5Vis its maximum supply voltage. BUS DRIVERis the logic IC it uses. Currently, it is equipped with 2 functions . It is equipped with 48 pins.
74FCT162374ETPAG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT162374ETPAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162374ETPAG Flip Flops applications.
- Clock pulse
- Registers
- Asynchronous counter
- Storage registers
- 2 – Bit synchronous counter
- Event Detectors
- Cold spare funcion
- EMI reduction circuitry
- Digital electronics systems
- Safety Clamp
